How to Install Window Regulator in 2004–2006 Ford Monterey – follow the instructions below to starting installation.
- Place the window regulator assembly through the access hole.
- Bolt the window regulator assembly in to the door.
- Attach the window regulator to the door using the necessary pop rivets and rivet gun.
- Attach the window door glass to the window regulator assembly. It maybe necessary to temporarily connect the power master switch assembly and the window lift motor to be able to line up the glass mounting holes to the window regulator.
- Tighten the window regulator mounting bolts to the door.
- Connect the electrical connector for the window lift motor.
- Install the water shield.
- Install the door panel, aligning the door panel on to the inner door belt weather strip and the alignment holes that are cut into the door. Once the door panel is aligned gently push in a downward position from the top of the door panel to properly interlock the door trim panel to the door.
- Install the trim panel for the exterior rear view mirror.
- Attach the screws that hold the door trim panel on to the door.
- Attach the door trim panel screw.
- Connect the power master switch assembly and install into the door trim panel.
- Install the door handle bezel assembly.
Note : this instructions support for : 1995–2003 Ford Windstar,2004-2006 Ford Freestar.
How to Remove Window Regulator in 2004-2006 Ford Freestar – please read removal instructions below to start removal.
- Eliminate the attached door trim solar panel affixing anchoring screws.
- Take away the interior bezel for your outdoors raise view mirror. any: Carefully eliminate the interio rdoor handle bezel assembly usinga cut elimination device. b: Utilizing a trim elimination tool,remove the actual learn switch bezel set up.
- Take away the mess that holds the inside door panel to the doorway.
- Disconnect the actual electrical connectors from your power master switch assembly.
- Remove the internal doortrim cell by tugging the particular bottomof the entranceway panel toward an individual, whilealso raising in an upward motion.-Remove the lake defend from your front door.
- Utilizing a choose or perhaps flat-bladescrewdriver, disconnect the windowmotor connection coming from thewindow lift engine.
- Using possibly painter’s mp3, the pitching wedge, or even a saddle mug assemblage, affix to thewindow cup to help keep the actual goblet stationary. Disappointment to do so could result in cup damage.
- Employing a ž” exercise little bit as well as a3/8” drill, routine away the center of therivets attaching the particular windowregulator for the front door. In a few cases you are able to use the impact to operate a vehicle thecenter with the rivet away in order that you can convey more surface area with regard to thedrill bit to remain based on.- Remove the remaining attaching bolts which keep thewindow regulator to the doorway.
- Remove the windowregulator from the access hole.
Note : this instructions support for : 1995–2003 Ford Windstar,2004–2006 Ford Monterey.
Popular Search : how to disconnect glass from window regulator on 2004 ford freestar