Lamborghini Gallardo Installation — Repair guide on the type of vehicle the Lamborghini Gallardo. Our guide this time was on how to install the AC panel on the Lamborghini Gallardo. for a more complete guide you can take the free file here.
Using the low tack tape, tape off the leather around the shift hump.
Using the MAcarbon chisel pry tool, pry up the center console from the rear. The plastic pry tool prevents any damage occurring to the plastic.
Lift up the hump once the rear has been removed.
Flip the console over. Remove the electrical plug from the E-Gear control.
Remove the plug from the external mirror switch.
Remove the plug from the suspension lifting control.
Tape off the leather around the AC panel.
Pull from the bottom right corner of the AC panel until you feel the clip release. Repeat for the lower left corner.
Insert the upper edge of the carbon AC panel under the switch panel.
I hope this guide can be a reference you in doing the installation. most of your success is our priority. good luck