How to Install Air Suspension Bracket — Here we would like to share information about the installation, removal, replacement, how to replace, instructions for installation, removal instructions, replacement instructions, and various tips and tricks we have provided to you. well at this opportunity udugs.com will share information about.
Take away side trim on proper-hand side of vehicle boot space by pulling catch.
Take away decrease aspect trim on proper-hand aspect of vehicle boot space by lifing and rotating upwards.
Take away two plastic hook fixings (quarter turn to left and pull) and load securing eye (6mm allen key). Take away trim piece by pulling base. Tailgate bridge finisher (that covers the hinge) could be unclipped to assist removal. Remove warning triangle by unclipping at high end.
Take away three plastic nut fixings (13mm socket) as indicated and take away the snap fixing on right hand trim panel utilizing the suitable tool.
Take away plastic tray from vehicle. Observe the interface with the ahead trim panel to aid refitment.
Insert PrestonAIR bracket into newly revealed physique cavity and loosely insert the two M8 x 16mm screws as suppled into threaded physique cleat. With bracket in place, mark position of holes and inside-edges of bracket ft on physique panel with a everlasting marker or paint pen. Take away bracket and drill 2 x 8.5mm holes in body panel where marked.
Thank you for visiting this blog udugs.com. if you want to see the full instructions please go to the PDF file : http://www.preston-air.com/assets/files/InstallationGuides/Installation_Guide-Preston_Air-Air_Suspension_Brackets.pdf. hope that helps