How to Install Rear Backup Camera System on Chevrolet Silverado HD & GMC Sierra HD — Here we would like to share information about the installation, removal, replacement, how to replace, instructions for installation, removal instructions, replacement instructions, and various tips and tricks we have provided to you. well at this opportunity udugs.com will share information about How to Install Rear Backup Camera System on Chevrolet Silverado HD & GMC Sierra HD.
Ensure all lamps and accessories are OFF. Make sure the ignition switch is in the OFF position.
Loosen the destructive battery cable bolt. Take away negative battery cable from terminal and position away from battery.
Wait one (1) minute previous to working on the car to assure all airbag methods have been disabled to your safety.
Decrease Tailgate and remove middle bezel mounting bolt (1), using 13mm socket.
Release, by hand, the three retainer clips securing the bezel to the tailgate outer panel. Raise the Tailgate latch handle in order to assist within the removal of the latch deal with bezel.
If the Truck is not geared up with Tailgate Lock (&A60), remove the two higher Tailgate Latch Deal with Bolts (1) from the Tailgate Latch Deal with (2), using 13mm socket. Launch Rods before eradicating (inset). If geared up, skip this step. Prepare a work floor for the Tailgate, as it will likely be removed.
Disconnect the 2 Tailgate help cables. With assistance from an assistant, remove the Tailgate and locate to clean work surface.
Thank you for visiting this blog. if you want to see the full instructions please go to the PDF file : http://cdn.shopify.com/s/files/1/0213/7812/files/Backup_Camera_Install_Instructions.pdf. hope that helps